| Manufacturer |
Case |
| Model |
1650L
LGP |
| ENGINE |
|
| Fuel |
Diesel |
| Make and Model |
Case 667TA/EDJ |
| Gross Power @ rpm - hp
(kW) |
156 (116) @ 2200 |
| Net Power @ rpm - hp
(kW) |
144 (107) @ 2200 |
| Rating Standard |
SAE J1349 |
| Peak Torque - lb-ft
(N-m) @ rpm |
509 (690) @ 1400 |
| Number Of Cylinders |
6 |
| Displacement - cu in
(L) |
411 (6.7) |
| Aspiration |
Air-to-air aftercooled |
| Cooling Type |
Water |
| ELECTRICAL
SYSTEM |
|
| System Voltage |
24 |
| Alternator Output -
Amps |
65 |
| Battery Rating - Amp/Hr |
np |
| Battery CCA |
700 |
| TRANSMISSION |
|
| Transmission Type |
Hydrostatic |
| Max Travel Speed, FWD -
mph (kph) |
6 (9.7) |
| Max Travel Speed, REV -
mph (kph) |
6.0 (9.7) |
| Number Of Speeds - FWD |
1 |
| Number Of Speeds - REV |
1 |
| Drawbar Pull At Stall -
lbf (kN) |
58,000 (258.0) |
| STEERING |
|
| Steering System Type |
Dual-path HS w/ctr
rotation |
| FINAL
DRIVE |
|
| Final Drive Type |
Triple reduction |
| BRAKES |
|
| Service Brake Type |
Hydrostatic drive |
| Parking Brake Type |
Spring applied/hyd.
release |
| UNDERCARRIAGE |
|
| Track Type |
Steel shoe |
| Shoe Description |
Single grouser |
| Shoe Width - in (mm) |
34" (860) |
| Number Of Shoes |
45 |
| Number Of Upper Rollers |
2 |
| Number Of Bottom
Rollers |
8 |
| Link Pitch - in (mm) |
7.5" (190) |
| Suspension Type |
Equalizer bar |
| Track Frame Oscillation
At Front Idler - in (mm) |
np |
| Track Tension
Adjustment |
Grease |
| Track On Ground - in
(mm) |
120" (3050) |
| Track Gauge - in (mm) |
84" (2130) |
| HYDRAULIC
SYSTEM |
|
| Hydraulic System Type |
np |
| Main Pump Type |
np |
| Total Flow - gpm
(L/min) |
34.9 (132.1) |
| Main Relief Pressure -
psi (bar) |
2830 (195) |
| PERFORMANCE
- BLADE |
|
| Blade Type |
6-way (PAT) |
| Blade Capacity - cu yd
(cu m) |
4.2 (3.21) |
| Blade Width - in (mm) |
157" (3990) |
| Blade Height - in (mm) |
39.4" (1000) |
| Blade Depth Below
Ground - in (mm) |
23.2" (590) |
| Blade Lift Above Ground
- in (mm) |
35.4" (900) |
| Blade Angle, L/R Each
Direction - Deg |
28º / 28º |
| Blade Tilt - in (mm) |
21.7" (550) |
| Blade Pitch |
Mechanical |
| PERFORMANCE
- RIPPER |
|
| Ripper Type |
Parallel |
| Ripper Depth,
Multi-Shank - in (mm) |
19" (480) |
| Number Of Ripper Shanks |
3 |
| Ripper Weight w/ One
Shank - lbs (kg) |
na |
| Weight Of Additional
Ripper Shank - lbs (kg) |
np |
| DIMENSIONS |
|
| Overall Length - ft/in
(mm) |
18' 7" (5660) |
| Width w/ Blade At Max
Angle - ft/in (mm) |
11' 7" (3530) |
| Height To Top Of Cab -
in (mm) |
10' 0.1" (3050) |
| Ground Clearance - in
(mm) |
13.7" (350) |
| OPERATING
WEIGHTS |
|
| Operating Weight - lbs
(kg) |
37,578 (17045) |
| SERVICE
CAPACITIES |
|
| Fuel Tank - gal (L) |
65 (246) |
| Engine Oil - gal (L) |
4.13 (16) |
| Cooling System - gal
(L) |
8.5 (32) |
| Hydraulic Reservoir -
gal (L) |
26 (98l) |
| Hydraulic System Total
- gal (L) |
np |
550H LGP,550H LT,550H WT,650K LGP Series 3,650K LT Series 3,650K WT Series 3,750K LGP Series 3,750K LT Series 3
,750K WT Series 3,850K LGP Series 3,850K WT Series 3,850K XLT Series 3,1150K XLT,1150K WT,1150K LGP,1650L LGP
,1650L XLT,1650L WT,1850K LGP Series 3,1850K LT Series 3,1850K XLT Series 3
|
