| Manufacturer |
Case |
| Model |
850K
XLT Series 3 |
| ENGINE |
|
| Fuel |
Diesel |
| Make and Model |
Case 668T/M2 |
| Gross Power @ rpm - hp (kW) |
99 (74) @ 2000 |
| Net Power @ rpm - hp (kW) |
96 (72) @ 2000 |
| Rating Standard |
SAE J1349 |
| Peak Torque - lb-ft (N-m) @ rpm |
325 (441) @ 1200 |
| Number Of Cylinders |
6 |
| Displacement - cu in (L) |
411 (6.7) |
| Aspiration |
Turbocharged |
| Cooling Type |
Water |
| ELECTRICAL
SYSTEM |
|
| System Voltage |
12 |
| Alternator Output - Amps |
65 |
| Battery Rating - Amp/Hr |
np |
| Battery CCA |
650 |
| TRANSMISSION |
|
| Transmission Type |
Hydrostatic |
| Max Travel Speed, FWD - mph (kph) |
6 (9.7) |
| Max Travel Speed, REV - mph (kph) |
6 (9.7) |
| Number Of Speeds - FWD |
1 |
| Number Of Speeds - REV |
1 |
| Drawbar Pull At Stall - lbf (kN) |
42,000 (186.8) |
| STEERING |
|
| Steering System Type |
Dual-path HS w/ctr rotation |
| FINAL
DRIVE |
|
| Final Drive Type |
Triple reduction |
| BRAKES |
|
| Service Brake Type |
Hydrostatic drive |
| Parking Brake Type |
Spring applied/hyd. release |
| UNDERCARRIAGE |
|
| Track Type |
Steel shoe |
| Shoe Description |
Single grouser |
| Shoe Width - in (mm) |
20" (510) |
| Number Of Shoes |
40 |
| Number Of Upper Rollers |
1 |
| Number Of Bottom Rollers |
7 |
| Link Pitch - in (mm) |
6.73" (170) |
| Suspension Type |
Rigid |
| Track Frame Oscillation At Front Idler - in (mm) |
np |
| Track Tension Adjustment |
Grease |
| Track On Ground - in (mm) |
93" (2360) |
| Track Gauge - in (mm) |
62" (1570) |
| HYDRAULIC
SYSTEM |
|
| Hydraulic System Type |
np |
| Main Pump Type |
np |
| Total Flow - gpm (L/min) |
23.9 (90.5) |
| Main Relief Pressure - psi (bar) |
3025 (209) |
| PERFORMANCE
- BLADE |
|
| Blade Type |
6-way (PAT) |
| Blade Capacity - cu yd (cu m) |
2.16 (1.65) |
| Blade Width - in (mm) |
104" (2640) |
| Blade Height - in (mm) |
36" (910) |
| Blade Depth Below Ground - in (mm) |
19" (480) |
| Blade Lift Above Ground - in (mm) |
34.4" (870) |
| Blade Angle, L/R Each Direction - Deg |
25º / 25º |
| Blade Tilt - in (mm) |
15" (380) |
| Blade Pitch |
Mechanical |
| PERFORMANCE
- RIPPER |
|
| Ripper Type |
Parallel |
| Ripper Depth, Multi-Shank - in (mm) |
14" (360) |
| Number Of Ripper Shanks |
5 |
| Ripper Weight w/ One Shank - lbs (kg) |
na |
| Weight Of Additional Ripper Shank - lbs (kg) |
np |
| DIMENSIONS |
|
| Overall Length - ft/in (mm) |
14' 6" (4420) |
| Width w/ Blade At Max Angle - ft/in (mm) |
8' 0" (2440) |
| Height To Top Of Cab - in (mm) |
9' 1.2" (2770) |
| Ground Clearance - in (mm) |
14.9" (380) |
| OPERATING
WEIGHTS |
|
| Operating Weight - lbs (kg) |
19,600 (8891) |
| SERVICE
CAPACITIES |
|
| Fuel Tank - gal (L) |
50 (189) |
| Engine Oil - gal (L) |
3.95 (15) |
| Cooling System - gal (L) |
5 (19) |
| Hydraulic Reservoir - gal (L) |
20 (76l) |
| Hydraulic System Total - gal (L) |
np |
550H LGP,550H LT,550H WT,650K LGP Series 3,650K LT Series 3,650K WT Series 3,750K LGP Series 3,750K LT Series 3
,750K WT Series 3,850K LGP Series 3,850K WT Series 3,850K XLT Series 3,1150K XLT,1150K WT,1150K LGP,1650L LGP
,1650L XLT,1650L WT,1850K LGP Series 3,1850K LT Series 3,1850K XLT Series 3
|
